5/4 X 6 X 12, Southern Pine, No. 2, Pressure Treated (ACQ .40), Radius-Milled Edge, Surfaced 4 Sides(5 4 X 6 X 12 Southern Pine No 2 Pressure Treated Acq 40 Radius Milled Edge Surfaced 4 Sides)

Southern Pine, Pressure Treated (ACQ .40), No. 2 grade lumber. Often described as a 12 ft, 1.25 x 6 (nominal sizing), this product typically measures 5/4 in thick by 5-1/2 in wide. Appearance notes: Radius-Milled Edge, Surfaced 4 Sides.

Product Details

Manufacturer: WOOD PRODUCTS

Manufacturer’s Part Number: 5/4x06x12.SP.No2.PT-ACQ.40.RME-S4S

Show me more Pressure-Treated Lumber

Product Features

• Radius-milled edge, surfaced on 4 sides for a smooth attractive appearance and finish

• Pressure-treated with Alkaline Copper Quaternary (ACQ) — retention level .40 — to protect against termites, decay and rot; intended for above ground, ground contact, freshwater contact and saltwater splash

• Southern Pine lumber has been popular since Colonial times and consists of four main species: longleaf, loblolly, shortleaf and slash; design values for Southern Pine are comparable to other softwood species used in residential and commercial construction

• No. 2 grade lumber is used in all general construction; this grade is designed for the many uses where higher strength properties are not needed and where serviceability is important; few defects are permitted and knots of any quality are allowed as long as they are well spaced and do not exceed size regulations

Product Specifications

Actual Length	12 ft
Actual Thickness	5/4 in
Actual Width	5-1/2 in
Appearance	Radius-Milled Edge, Surfaced 4 Sides
Grade	No. 2
Nominal Length	12 ft
Nominal Measurement	5/4in x 6in
Nominal Thickness	1.25 in
Nominal Width	6 in
Seasoning	Pressure Treated (ACQ .40)
Species	Southern Pine